Godex EZPi-1300 User Manual download pdf (Page 40)

17. Put the Fixture Plate first then the

Washer and tighten the Nut to

mount Antenna Connection Wire on

the printer.

【

Note

】

It is suggested to tighten the Nut with

long-nose pliers when mounting the

Antenna Connection Wire.

18. Turn the Antenna according to the

direction as arrow showed to mount

it on the Antenna Connection Wire.

The angle of Antenna can be

adjusted if needed.

19. To complete the installation,

reassemble the middle

compartment and tighten the

screws onto the bottom of the

printer, then put the top cover back.

【

Note1

】

After the WLAN module installation is

completed, please send the

"^XSET,USBETHERNET,1" printer

command to printer for activating the

Ethernet connection function. Please

mind that USB port will be deactivated

once the Ethernet connection function is

activated.

【

Note2

】

The first time setting operation must be

performed with Ethernet (wired)

connection before you can access

wireless network.

EZPi-1000 User’s Manual

39

1 2 ... 35 36 37 38 39 40 41 42 43 44 45

Comments to this Manuals

No comments