Godex EZPi-1300 User Manual download pdf (Page 44)

5-3. Print Line Adjustment

To get better printing balance and

quality, use print head adjusting gear

to adjust the contacting surface

between print head and label.

1. When turning print head

adjusting gear counter-clockwise

(as arrow 1 shows), print head

would move in the direction

where arrow A shows.

2. When turning print head

adjusting gear clockwise (as

arrow 2 shows), print head

would move in the direction

where arrow B shows.

A

B

1

2

5-4. Adjust the cutter

1. A cutter-adjusting hole is present

on the side of cutter (where A is

pointing to).

2. The cutter will not work properly if

there is a paper jam. Turn the

power off and use a #M3 hexagon

wrench inserted into the hole “A”,

and then turn it counter-clockwise.

3. Power on the printer after clearing

the paper jam, the cutter will reset

automatically.

【

Note

】

The label / paper used for cutting is

suggested to be at least 30mm in

height.

EZPi-1000 User’s Manual

43

1 2 ... 39 40 41 42 43 44 45

Comments to this Manuals

No comments